9 Best Track Saws for the Money (October 2026)
The best track saws for the money include the Makita SP6000J Plunge Track Saw for controlled, precise cuts, the WEN CT1065 Plunge Track Saw for a simple corded setup, and the WEN Plunge Track Saw Bundle with 100-Inch Rail for long cuts with a rail included.
On this page (12 sections)
- How we chose these track saws for the money
- Which track saw gives the most useful balance?
- Is the WEN CT1065 a good-value track saw?
- Which affordable setup includes a long rail?
- Which saw is best when cut depth matters?
- What makes the Triton TTS1400 different?
- Is a cordless track saw worth the extra planning?
- Which track saw includes a track for mixed materials?
- Which cordless kit gives you two batteries?
- Is the VEVOR track saw a sensible basic option?
- What should you compare before buying a track saw?
- Which track saw is the best value for your work?
The best track saw for the money is the Makita SP6000J for buyers who want controlled speed and precise cuts. The WEN bundle is a practical alternative when you want a long rail included, while the Evolution kit includes a shorter track and is designed for multiple materials.
A track saw purchase includes more than the saw itself. Rail length, compatibility, clamps and the depth you need can change which setup gives you the best value.
If you're new to the tool, start with what a track saw is and who needs one. For occasional straight cuts with a circular saw, compare the best circular saw guide rails.
Our picks at a glance
-
1
-
2
-
3
Best for long cuts with a rail includedWEN Plunge Track Saw Bundle with 100-Inch Rail
8.0/10 our score
See it on Amazon
- 4
Check itWEN CT1274 7-1/4 Inch Track Saw
Best for deeper cuts - 5
Check itTriton TTS1400 Plunge Track Saw
Best for tool-free blade access - 6
Check itKreg 20V Ionic Drive Plunge Track Saw Kit
Best for cordless plunge cuts - 7
Check itEvolution R185CCSX Multi-Material Track Saw
Best for mixed materials - 8
Check itWEN Cordless 6-1/2 Inch Track Saw Kit
Best for a cordless kit with two batteries - 9
Check itVEVOR 6-1/2 Inch Plunge Track Saw Kit
Best for a basic plunge saw
How we chose these track saws for the money
The best track saw for the money depends on the whole setup: saw, rail, and the cuts you expect to make. We compared the listed features and focused on rail inclusion, cutting depth, speed control, power source and useful kit contents.
A saw with a lower score may still be the better fit if it includes the rail you need or solves a specific job. Scores weigh specs, features and buyer feedback against what you're shopping for.
Before comparing models, decide how long your typical cut is. A 40 in track may work for trimming a door or breaking down smaller panels, while long plywood rips call for a longer compatible guide.
| Product | Best for | Power | Speed | Depth at 90° | Our score |
|---|---|---|---|---|---|
| Makita SP6000J Plunge Track Saw | controlled, precise cuts | Corded electric, 12 A | 2,000–5,200 RPM | 2-3/16 in | 8.4 |
| WEN CT1065 Plunge Track Saw | a simple corded setup | AC, 10 A | 8.2 | ||
| WEN Plunge Track Saw Bundle with 100-Inch Rail | long cuts with a rail included | Corded electric, 10 A | 8.0 | ||
| WEN CT1274 7-1/4 Inch Track Saw | deeper cuts | Corded electric, 12 A | 2,000–6,000 RPM | 2.6 in | 7.7 |
| Triton TTS1400 Plunge Track Saw | tool-free blade access | Corded electric, 1,400 W | 2,000–5,300 RPM | 7.6 | |
| Kreg 20V Ionic Drive Plunge Track Saw Kit | cordless plunge cuts | 20 V battery | 2-1/8 in | 7.5 | |
| Evolution R185CCSX Multi-Material Track Saw | mixed materials | Corded electric, 15 A | 7.3 | ||
| WEN Cordless 6-1/2 Inch Track Saw Kit | a cordless kit with two batteries | 20 V battery | 2.25 in | 7.1 | |
| VEVOR 6-1/2 Inch Plunge Track Saw Kit | a basic plunge saw | Corded electric, 1,200 W | 5,500 RPM | 2.16 in | 6.8 |
Which track saw gives the most useful balance?
The Makita SP6000J is the strongest all-around pick here for controlled, corded cutting. Its variable-speed dial and electronic speed control give you more ways to match the saw to the task.
Makita SP6000J Plunge Track Saw: Best for controlled, precise cuts
- 12 A motor
- Variable speed from 2,000 to 5,200 RPM
- Electronic speed control
- Maximum depth of 2-3/16 in at 90°
Variable speed and electronic speed control suit buyers who want to match the saw to the material and keep speed steady under load. The guide rail system is optional.
Pros
- Electronic speed control
- Variable speed dial
- Large stated cutting capacity
Cons
- Guide rail system is optional
- Corded power
Makita pairs a 12 A motor with a variable speed range from 2,000 to 5,200 RPM. Electronic speed control maintains speed under load, which is useful when a cut meets changing resistance.
The saw has a stated maximum depth of 2-3/16 in at 90° and 1-9/16 in at 45°. Its bevel range reaches -1° to 48°, with positive stops at 22.5° and 45°.
The guide rail system is optional, so include a compatible rail in your budget. Makita describes the saw and rail system as a way to make accurate straight and bevel cuts with minimal tear-out.
Choose it when you want variable speed and a corded saw for repeat work in a shop or on site. If you only need a saw for occasional plywood cuts, compare the total cost of a rail setup with a circular saw and guide.
Is the WEN CT1065 a good-value track saw?
The WEN CT1065 is a good fit if you want a corded plunge saw and already have, or plan to buy, a compatible rail. It offers a 10 A motor and a stated depth of up to 2-1/3 in at 90°.
WEN CT1065 Plunge Track Saw: Best for a simple corded setup
- 10 A motor
- Cuts up to 2-1/3 in thick at 90°
- 45° bevel cuts up to 1-5/8 in thick
- Track sold separately
This corded saw has a plunge function and accepts compatible WEN tracks. It makes sense if you already have a rail or want to choose one separately.
Pros
- Plunge cuts and bevels
- Compatible with WEN CT9502 track
- Blade included
Cons
- Track sold separately
- Corded power
The CT1065 includes a 6-1/2 in 24-tooth carbide-tipped blade. It can bevel to 45° and cut boards up to 1-5/8 in thick at that angle.
The rail isn't included with this saw. WEN names its CT9502 100 in track and CT992F clamps as compatible accessories, so check whether those pieces match the length and support your work needs.
This is a straightforward choice for ripping boards, trimming doors and plunge cuts when you want a separate saw and rail purchase. For a package with 100 in of guide rail included, see the WEN bundle below.
Which affordable setup includes a long rail?
The WEN bundle is the clearest choice if you want the saw and a long rail system in one package. It includes two 50 in universal guides, adapters and a plunge saw.
WEN Plunge Track Saw Bundle with 100-Inch Rail: Best for long cuts with a rail included
- 10 A plunge saw
- Two 50 in universal guides
- Adapters with four set screws
- Straight cuts over 8 ft
The bundle pairs a plunge saw with two 50 in guides and adapters. It suits buyers who want a rail system in the same package for long straight cuts.
Pros
- 100 in of guide rail included
- Adapters included
- Bevel cuts up to 1-5/8 in thick
Cons
- Clamps sold separately
- Corded power
The two guides can be joined for straight cuts over 8 ft, according to WEN. Four set screws on the adapter set help secure the saw to the guides, and the base has grooves that slide along the track.
The saw has a 10 A motor, a 24-tooth carbide-tipped blade and a stated maximum depth of 2-1/3 in. It can make 45° bevel cuts in boards up to 1-5/8 in thick.
The bundle is useful when starting without a rail, but clamps are sold separately. Check how you'll support the sheet and keep the long guide from shifting before making a cut.
Which saw is best when cut depth matters?
The WEN CT1274 offers the largest stated 90° cut depth among these picks, at 2.6 in. Its 7-1/4 in blade format also accepts standard miter and circular saw blades with 5/8 in arbors.
WEN CT1274 7-1/4 Inch Track Saw: Best for deeper cuts
- 12 A motor
- Variable speed from 2,000 to 6,000 RPM
- Maximum depth of 2.6 in at 90°
- Accepts standard 7-1/4 in blades with 5/8 in arbors
A larger blade and stated 2.6 in cutting depth make this WEN a fit for buyers whose work needs more depth than a typical 6-1/2 in saw provides. Compatible tracks are sold separately.
Pros
- Variable speed
- Accepts standard 7-1/4 in blades
- 360-degree dust port adapter included
Cons
- Track sold separately
- Corded power
Variable speed ranges from 2,000 to 6,000 RPM. The saw also has a 360-degree dust port adapter, and WEN lists compatibility with its CT9502 and CT9110 tracks.
The rail isn't included, so account for that when comparing its value with bundled kits. The stated bevel depth is 1.85 in at 45°, which may help if your projects need more depth on angled cuts.
Pick this model when deeper cuts are a priority. If your work is mostly sheet goods and standard panel cuts, a 6-1/2 in saw may be enough and easier to match with your existing blades and setup.
What makes the Triton TTS1400 different?
The Triton TTS1400 stands out for its blade-change mode, variable speed and rotating vacuum outlet. Its compatible tracks are sold separately.
Triton TTS1400 Plunge Track Saw: Best for tool-free blade access
- 1,400 W motor
- Variable speed from 2,000 to 5,300 RPM
- Blade change mode
- Tracks sold separately
The Triton offers a dedicated blade-change mode and an accessible shaft lock. Its guide tracks are sold separately, so factor in a compatible rail.
Pros
- Variable speed with soft start
- Blade-change mode
- Rotating vacuum outlet
Cons
- Track sold separately
- Corded power
The saw has a 1,400 W motor with a stated no-load range of 2,000 to 5,300 RPM. Its bevel range reaches 48°, and the 6-1/2 in blade is included.
A plunge lock and a switch lockout during blade changes are among its stated safety features. Triton also includes onboard tool storage and a universal vacuum system adapter with a 360-degree outlet.
Choose it if those features matter for your cutting routine and you can source a compatible track. The rail requirement makes it less of a ready-to-cut kit than the WEN bundle or Evolution set.
Is a cordless track saw worth the extra planning?
A cordless saw is useful when a power cord would restrict where you can place the work. The Kreg kit includes a battery and charger, while its compatible guide track is sold separately.
Kreg 20V Ionic Drive Plunge Track Saw Kit: Best for cordless plunge cuts
- 20 V battery power
- Bevel range from -1° to 47°
- Maximum depth of 2-1/8 in at 90°
- Kreg 62 in guide track sold separately
This kit includes a battery and charger for cordless use. The compatible Kreg guide track is a separate purchase, so check the rail cost and length for your projects.
Pros
- Cordless power
- Battery and charger included
- Blade-left design for right-handed users
Cons
- Guide track sold separately
- Shorter maximum cut depth at 90° than several corded picks
Kreg's 20 V plunge saw has a stated depth of 2-1/8 in at 90° and 1-1/2 in at 45°. Its bevel range runs from -1° to 47°, and the blade-left layout is designed for right-handed users.
The compatible Kreg 62 in guide track is a separate purchase. That makes it important to compare the full kit cost and rail length with a corded bundle before deciding.
For a cordless kit that includes two batteries, the WEN option below is another choice. If you work near an outlet and make long cuts often, a corded saw avoids planning around battery charge.
Which track saw includes a track for mixed materials?
The Evolution R185CCSX is the pick here for buyers who want a track included and a saw designed for multiple materials. Its 40 in track is shorter than the WEN bundle's combined guides.
Evolution R185CCSX Multi-Material Track Saw: Best for mixed materials
- 15 A motor
- 40 in track included
- Designed for wood, plastic and metal
- Adjustable depth up to 2-1/2 in
The included 40 in track and multi-material design distinguish this kit. It suits buyers who need to cut more than wood and want a short rail in the box.
Pros
- Track included
- Designed for multiple materials
- Dust extraction port and adapter included
Cons
- Included track is 40 in
- Corded power
Evolution says the saw is designed to cut wood, plastic and metal without changing blades. The kit includes a 40 in track, a 7-1/4 in blade and a dust extraction port with adapter.
Its 15 A motor has an adjustable depth up to 2-1/2 in, and the saw tilts from 0° to 45°. Consider the shorter rail length when planning long cuts through sheet goods.
Choose it if the mixed-material design fits your work and the included track covers common cuts. For long panel rips, compare it with the WEN bundle's two 50 in guides.
Which cordless kit gives you two batteries?
The WEN cordless kit includes two 20 V 4.0 Ah batteries and a charger, making it the clearest battery bundle in this roundup. Its compatible guide rails are sold separately.
WEN Cordless 6-1/2 Inch Track Saw Kit: Best for a cordless kit with two batteries
- Brushless motor
- Two 20 V 4.0 Ah batteries and charger
- Variable speed from 2,000 to 5,500 RPM
- Compatible tracks sold separately
The kit includes two batteries and a charger, plus a brushless motor with variable speed. Its compatible WEN tracks are sold separately.
Pros
- Two batteries included
- Brushless motor
- Variable speed
Cons
- Track sold separately
- Cordless runtime depends on the work and battery charge
The brushless motor has variable speed from 2,000 to 5,500 RPM. The saw's stated cut depth is 2.25 in at 90° and 1.65 in at 45°.
It also includes a 48-tooth carbide-tipped blade, a track-alignment cam and a dust port adapter. The two battery ports are designed to use the included battery system for cordless power.
Choose it if you want a cordless kit with two batteries and already have access to a compatible WEN rail. Compare the rail cost and length before treating the box contents as a complete track setup.
Is the VEVOR track saw a sensible basic option?
The VEVOR is a basic corded plunge saw with a 1,200 W motor and a 48-tooth blade. Its guide rail is not included, so rail fit is a key buying check.
VEVOR 6-1/2 Inch Plunge Track Saw Kit: Best for a basic plunge saw
- 1,200 W motor
- 5,500 RPM
- Maximum depth of 2.16 in at 90°
- Guide rail not included
The VEVOR has a 48-tooth blade and a 0–45° angle range. The guide rail is sold separately, so confirm rail compatibility before choosing it.
Pros
- 48-tooth blade included
- Dust port connects to a vacuum
- 0–45° angle adjustment
Cons
- Guide rail not included
- Rail compatibility needs confirmation
The saw runs at a stated 5,500 RPM and has a maximum depth of 2.16 in at 90° and 1.65 in at 45°. It adjusts from 0° to 45° for bevel and edge cuts.
A dust port can connect to a vacuum, and the blade guard encloses the blade. The available product details don't name a compatible rail model, so confirm fit before buying a guide separately.
Choose it if the core cutting depth and angle range suit your work and you can confirm a rail match. If you'd rather avoid that compatibility question, choose one of the kits with a track included.
What should you compare before buying a track saw?
Compare the saw and guide rail as a single setup, then check cutting depth, bevel needs and power source. A lower-cost saw can need a separate rail, clamps and adapters before it's ready for long cuts.
Does the rail come with the saw?
Some picks include a rail: the WEN bundle includes two 50 in guides, and Evolution includes a 40 in track. Makita, Triton, both cordless WEN and Kreg require separate compatible guides based on the details available here.
The WEN CT1065 and CT1274 are compatible with specified WEN rails, but those rails are separate. Keep the rail length in mind because a short guide may need repositioning for a long rip.
For a different straight-edge option, compare our guide to circular saw guide rails and clamp edges. If you already own a circular saw, our guide to making a circular saw cutting guide explains a simple alternative.
How much cutting depth do you need?
Match the saw's published depth to the thickest material you expect to cut, with room for the actual setup. The CT1274 has the largest stated 90° capacity here at 2.6 in, while the Kreg lists 2-1/8 in.
Bevel depth is lower than straight-cut depth on several models. Check both figures if you often make angled cuts through thick boards.
Should you choose corded or cordless?
Corded saws suit a fixed work area and avoid charging batteries between sessions. Cordless models let you move without a power cord, but the rail and battery system still need to fit the job.
For more detail on the tradeoff, read our corded vs cordless circular saw comparison. If your main task is breaking down plywood, our plywood cutting guide covers sheet support and cut planning.
Which track saw is the best value for your work?
Choose the Makita if you want variable speed and electronic speed control for regular corded work. Pick the WEN bundle if a long rail included in the package matters most, or the Evolution if you want a short track and multi-material design.
For deeper cuts, the WEN CT1274 has the largest stated 90° capacity in this group. For cordless work, choose Kreg for its included battery and charger or WEN for a kit with two batteries, then budget for a compatible track.
Our top 3 picks at a glance
-
1
-
2
-
3
Best for long cuts with a rail included
WEN Plunge Track Saw Bundle with 100-Inch Rail
8.0/10 our score
See it on Amazon
Frequently asked questions
What makes a track saw good value?
A good-value track saw fits your cut depth, rail needs and power preference without making you buy features you won't use. Compare the saw and compatible rail as one setup, since some models include a guide and others require a separate purchase.
Also check whether the rail length suits your longest common cut.
Do track saws come with a guide rail?
Some do, but several saws here require a separate rail. The WEN bundle includes two 50 in guides, and the Evolution includes a 40 in track.
Check the exact kit contents and compatibility before buying, especially if you already own a rail from another brand.
Is a track saw worth it for plywood?
A track saw can help guide long, straight cuts across plywood without moving a large sheet over a table saw. Support the sheet across the cut, set the depth for the material, and secure the rail so it cannot shift.
A circular saw guide rail may also suit occasional straight cuts.
Should I choose a corded or cordless track saw?
Choose corded if you want power without managing battery charge, and cordless if moving around a jobsite without a cord matters more. The Kreg and WEN cordless options include batteries, while the corded picks need an outlet.
For more detail, see our corded vs cordless circular saw comparison.
Can a track saw replace a table saw?
A track saw can handle many long rip and panel cuts, but it doesn't replace every table-saw task. It cuts the workpiece where it sits, while repeat narrow rips and small parts may call for a different setup.
Read what a track saw is and who needs one before deciding which tool fits your shop.
